Kunshan Yi Hao Sheng Electronic Technology Co., Ltd
Contact: Mr. Deng
Tel: + 86-512-57297908 57297928
Address: 789 Huayuan Road, Zhangpu Town, Kunshan City, Jiangsu Province
Precautions for Wiring Harness of Industrial Equipment
1: adjust the pay-off tension to make it appropriate.
2: attention to select the line and found that when there is loose chaos, must be rewound after the machine.
3: Note that the operation method, carefully check the position of the reel, so that the release of the line does not swing does not jump, check the single line through the place, there is no out of the guide wheel groove phenomenon.
4: to check the core surface quality, to see if there are cracks, slag, scar and other defects.
5: If the broken line occurs in the inner layer, and the decapitation has gone too long, it can not be repaired, only to cut off the strand core, if the disconnection occurred in the outer layer, the line should be restored and then boot.